Wednesday, June 17, 2015

Just Right 9mm Carbine


I love pistol caliber carbines so when Bill's Gunshop and Range in Robbinsdale called and asked me to shoot and review the Just Right 9mm carbine I jumped at the opportunity.  Spoiler Alert: I'm really glad I did!

The JR 9 is a straight blowback operated semiautomatic carbine with a 17 inch barrel.  As with most modern sporting arms the JR 9 does not come with either sights or optics.  A Picatinny rail is machined into the top the received leaving it up to the owner to decide what he or she would like to mount on top of the firearm.  The folks at Bills put a nice TruGlo red dot optic on the JR for my evaluation. 

The JR comes with a six position collapsing buttstock and the receiver, trigger housing and magazine well are machined from aerospace grade 6061T-6 aluminum with black hardcoat anodizing.  The carbine weights 6.5 pounds and is 33.5 inches long with the fully extended buttstock.  Best of all JR proudly makes their firearms right here in the U.S.A.




Southpaws will be happy to know that the bolt charging handled can be placed on either side of the receiver.


The JR Carbines are chambered in 9mm, .40 S&W, .45 ACP and .357 SIG.  Once you buy the base model you can convert it to the other calibers via an adapter kit (sold separately).



The specimen I shot was in 9mm which is exactly what I would have chosen if this were my carbine.  Full metal jacket range rounds in 9mm are more reasonably priced than those in .40, .45 or .357 SIG. For self defense purposes a 9mm out of a 17 inch barrel is nothing to sneeze at.  According to the website "Ballistics by the Inch" (www.ballisticsbytheinch.com) a 17 inch barrel provides great velocities for the 9mm cartridge, for instance:

  • Cor Bon 115 grain +P jacketed hollow-point produces 1550 feet per second
  • Federal 115 grain standard velocity jacketed hollow-points will generate 1320 feet per second
  • Federal 124 grain Hydra Shok jacketed hollow-points will give you 1250 feet per second
  • Speer 124 grain Gold Dot Hollow-point ammunition provides a very respectable 1400 feet per second
  • Cor Bon 90 grain +P jacketed hollow-point will sizzle down range at 1766 feet per second



The JR 9s are produced to accept either Glock or Smith & Wesson M&P magazines and this one came with one Glock model 17, 17-round magazine.  If the carbine was mine I would get about three of the 33 round magazines or one of the larger capacity drum magazines.  The larger magazines would provide plenty of fun during recreational shooting and would provide some peace of mind if I had to use the carbine in defense of hearth and home.




Overall the JR 9 was very reliable.  This carbine was new, just out of the box, and out of 100 rounds fired I did experience one failure to eject.  In fairness to the JR, this was the last round pushed into the magazine and as I placed it in it felt different.  The case rim was sharp and the case seemed to be thicker than the rest of the ammo.  I was not surprised that this round caused some difficulty.



The bolt does not stay open after the last round is fired.  You must manually retract it and push the bolt handle downward into the "hold open" position.  This is of no moment for the recreational shooter.  If you were in a self-defense shooting scenario the chances that you would need reload would be fairly slim.  Your 17, 33 or 50 round magazine would have probably provided all the firepower you need.  I am not saying that I would not want an extra magazine I am just proffering that if I needed to reload then I am really in the wrong place at the wrong time.


Now here's the best part, the JR 9 is really accurate! The above target was shot at 75 feet with five round of Mag Tech 115 grain full metal jacketed ammunition.

The JR 9 provides a carbine that is a ton of fun to shoot, more accurate than you would expect and could save your bacon if your homestead was invaded.  There is nothing about this little carbine that I did not like!  Stop by Bill's and give a look and, as always...tell "em Average Joe sent you!


Glock Days at Arnzen Arms


Sunday, June 14, 2015

VZ Grips A Serious Upgrade For Your Pistol Or Revolver

(VZ Grips come standard on may new firearms such as the Dan Wesson ECO)

If you are unfamiliar with VZ grips you have probably seen them but may not have known what they are.  More and more savvy gun makers are supplying them on their pistols such as with the Dan Wesson ECO pictured above.  They know that the addition of a VZ grip is a mark of quality and showcases the pride that they have taken in the manufacture of their product.  As this review progresses I will show you some of the upgraded VZ grips that I have added to a few of my personal handguns.

The VZ grips are made of a composite material either being Micarta or G-10.
(Above is my CZ 75D PCR sporting VZ Tactical Diamond Black Desert Sand grips)

While to many people (myself included) Micarta seems to be a relatively new material it has actually been around since the 1890's.  Westinghouse developed a process for producing thermoset laminates and bestowed the trade name "Micarta" to the product.

(Kimber Pro Carry HD II wearing Double Diamond grips in Hyena Brown)

Micarta is made by applying heat and pressure to layers of paper and canvas or linen cotton material which have been impregnated with synthetic resin.  The result is a solid industrial laminated plastic that is extremely durable, lightweight and moisture resistant.  Unlike less durable plastics Micarta will not soften if it comes in contact with heat.


(CZ SP-01 Shadow with VZ Frag grips in Hyena Brown)
G 10 is similar to Micarta expect that glass is added to the cloth and resin before the heat and pressure is applied.  It is even more durable than Micarta and besides handgun grips and knife scales it is also used as an insulator in the electronics field as it is nearly impervious to water seepage.

(Kimber Pro Aegis wearing Frag MARSOC G 10 grips)

VZ makes a plethora of grips styles in different colors and textures as well as in standard or thin widths, which currently fit the following handguns:
  • All standard 1911s (Colt, Kimber, Springfield, SIG, Smith & Wesson, etc.)
  • Beretta 92
  • CZ
  • Springfield EMP
  • Browning Hi-Power
  • Smith & Wesson Revolvers (J, K/L, and N frames)
  • SIG
  • Rock Island Double Stack (but not for the TCM 22 frame)
  • Ruger 22/45
(Kimber Pro Carry II wearing the Elite Tactical grip in Black Desert Sand)

As you can see I have generously applied the VZ grips to my pistols but I recently bought a set for my Smith & Wesson Model 65 Ladysmith Revolver.

The set chosen was the Tactical Diamond Round Butt G 10 in Black Cherry.


These grips were a veritable Godsend for me as most revolver grips do not fit my hand and are not conducive to my accuracy or ability to fire follow-up shots with any reasonable speed.  Not so with the VZ grips.  They were just the right length and width and the Tactical Diamond checkering kept the grip secure in my grasp during firing.

I am not a particularly great shot with a revolver but these grips helped me post this 8 round group at 21 feet using Speer 135 grain+P Gold Dot Hollowpoint ammo.  That's more than enough accuracy to get the job done.

If you're looking for a great set of grips give VZ a look at www.vzgrips.com and tell 'em Average Joe sent you.