As you can see the Versa Carry is a Kydex clip kind of in an "S" shape. A white barrel support rod protrudes vertically from the bottom of the "S" which serves to keep your pistol from shifting out of place while you are carrying your concealed weapon. The top part of the "S" curves around into a clip that fits snugly over your belt. So, to "holster up" with the Versa Carry device you place the barrel of your weapon over the support rod
and begin to push the weapon and device inside the waistband of your pants
while you pull the top "S" clip out and over your belt.
The handgun is now very firmly set in place. It is not likely to move unless you have your belt on very loosely and your pants are a size or two too large.
It is also very easy to tuck your shirt in between the weapon and your waistband for occasions where you cannot wear an untucked shirt. Now the clip over your belt would be visible but if someone asks I just tell them it is a medical device and that usually ends their curiosity.
It is also very easy to tuck your shirt in between the weapon and your waistband for occasions where you cannot wear an untucked shirt. Now the clip over your belt would be visible but if someone asks I just tell them it is a medical device and that usually ends their curiosity.
The obvious comparison to the Versa Carry would be the Clip Draw device which was my primary carry mode for Glocks, 1911's, and J-frame revolvers for several years. One of the primary advantages of the Versa Carry over the Clip Draw apparatus is that you do not have to permanently attach the clip to your weapon.
All in all this is a nifty little design and perfect for the concealed carry licensee who finds that the bulk of a traditional holster makes it difficult to carry a concealed weapon for any length of time.
I showed this device off to several friends who find a dark cloud in every silver lining and they came up with some concerns about the design which I want to address.
Perceived Issues
Perceived Issue #1:
There is a standing debate as to whether you should carry a round in the chamber of your pistol if your pistol does not have an external, manually applied safety and/or if your carry mode does not cover the trigger guard. If you check your Glock manual, Glock does not recommend carrying a round in the chamber regardless of how you are carrying your pistol. Both Clip Draw and Versa Carry do not recommend carrying a pistol with a round in the chamber when using their devices but quite frankly I have not had a problem carrying with a round in the chamber with either device. Safety devices are not a "be all, end all" proposition. First of all, given time any mechanical device will be prone to failure and secondly, safety devices do not cure unsafe gun handling practices. You Tube is loaded with postings showing negligent discharges from people who had 1911's with both a grip safety and external slide safety. The negligent shots were due to the fact that they were not following the basic safe gun handling rules.
There is a standing debate as to whether you should carry a round in the chamber of your pistol if your pistol does not have an external, manually applied safety and/or if your carry mode does not cover the trigger guard. If you check your Glock manual, Glock does not recommend carrying a round in the chamber regardless of how you are carrying your pistol. Both Clip Draw and Versa Carry do not recommend carrying a pistol with a round in the chamber when using their devices but quite frankly I have not had a problem carrying with a round in the chamber with either device. Safety devices are not a "be all, end all" proposition. First of all, given time any mechanical device will be prone to failure and secondly, safety devices do not cure unsafe gun handling practices. You Tube is loaded with postings showing negligent discharges from people who had 1911's with both a grip safety and external slide safety. The negligent shots were due to the fact that they were not following the basic safe gun handling rules.
Hence, the Versa Carry device is no less or no more safe than the person who is using it. Respect your weapon, handle it responsibly and you will be in just as good if not better shape than someone whose wonder pistol has three passive and two manual safeties.
Perceived Issue #2:
If the support rod breaks off in my barrel won't it cause my barrel and/or breach to blow up?
Not likely. The support rod is cut to be a smaller diameter than the bore of your barrel. The rod is also made of Delrin which has natural lubricating properties and it is fairly slick. So if, in the heat of battle, you break the retention rod during your draw it is more than likely just going to fall out as long as you are using the the correct Versa Carry model for the handgun caliber you are carrying. In other words, don't try to save money by stuffing your 9mm handgun on your .40 caliber Versa Carry.
Perceived Issue #3
I don't like putting anything in my barrel, especially from the muzzle; isn't the support rod going to scratch my bore or otherwise mar my rifling?
Again, not likely and for the same reasons above. But the reasons this is not likely are:
Perceived Issue #2:
If the support rod breaks off in my barrel won't it cause my barrel and/or breach to blow up?
Not likely. The support rod is cut to be a smaller diameter than the bore of your barrel. The rod is also made of Delrin which has natural lubricating properties and it is fairly slick. So if, in the heat of battle, you break the retention rod during your draw it is more than likely just going to fall out as long as you are using the the correct Versa Carry model for the handgun caliber you are carrying. In other words, don't try to save money by stuffing your 9mm handgun on your .40 caliber Versa Carry.
Perceived Issue #3
I don't like putting anything in my barrel, especially from the muzzle; isn't the support rod going to scratch my bore or otherwise mar my rifling?
Again, not likely and for the same reasons above. But the reasons this is not likely are:
- The support rod is tapered at the top making insertion very easy
- The support rod is cut to be a smaller diameter than the bore of the caliber you are carrying
- The Delrin support rod is a fairly soft polymer
- The Delrin material has self lubricating properties
All of this means that your pistol barrel will slip over the support rod very easily and the risk of somehow marring the rifling is extremely low. If you somehow find yourself having difficulty getting your barrel over the support rod you are probably not using the Versa Carry device specified for the caliber of weapon you are carrying.
Perceived Issue #4
There isn't any type of active retention strap; what's to keep someone from snatching my pistol?
This is a concealed carry device so know one should know you are carrying a handgun. If they do then whatever type of garment is covering the weapon is insufficient and that is not your holster's fault.
Versa Carry Advantages
Along with the providing a carry option that is way less bulky than a traditional holster there are other distinct advantages to the Versa Carry device.
It is easy to remove the Versa Carry should you need to take it off upon entering a bathroom stall or need to lock it in your trunk upon arriving at a destination where concealed carry is banned such as a federal building. There are no belt loops requiring you to take half your belt off to remove the weapon. It is also easy to make a quick transition from strong side carry to cross draw if you are driving or going to be sitting for a long period of time.
If someone finds that carrying is not easy or is uncomfortable or self conscious about the bulk of a holstered weapon then they are very likely to leave the weapon at home. All in all, the Versa Carry device makes it easier for the concealed carry permit holder to carry their pistol and that is the kind of innovation we need.
